Free Shipping Over $49 Ending Soon

Base & Top Peel -Off Lac

$29.90

Use before and after your colour to create a glossy peel-off manicure that can be removed without acetone. Compatible with Peel Off Lac and Long Lasting colours, and suitable for LED or UV curing.

Base & Top Peel -Off Lac

How to Apply

Prepare the nail by gently buffing and cleansing with Nail Cleaner.
Apply a thin layer of Peel Off Base & Top Coat and cure for 60 seconds in an LED lamp (120 seconds in a UV lamp).
Apply 2 thin coats of colour, curing each coat for 60 seconds in an LED lamp (120 seconds in a UV lamp).
Finish with a thin layer of Peel Off Base & Top Coat and cure again.
After curing the final top coat, remove the sticky dispersion layer using Nail Cleaner.

Removal

When you’re ready to change your colour, gently lift an edge of the manicure and soak your fingertips in warm water. The polish should gradually loosen and peel away without acetone. Avoid forcefully pulling the product from the nail.

Pro Tips

Apply thin, even coats for the best durability.
Seal the free edge of the nail with each layer.
Proper nail preparation is essential for wear and easy removal.
Can be used with both Peel Off Lac colours and Long Lasting colours.
Always remove the sticky layer from the final cured top coat using Nail Cleaner.

Manufacture by : MI-NY Srl

Content : 11 ml / 0,37 FL.OZ.

POA : 24M

Ingredients : Acrylates Copolymer, Pentaerythritol tetra (3-mercaptopropionate),2-Isopropyl Thioxanthone, Dimethicone

How To Apply

1

Lightly Buff to Mattify

Creates grip for longer wear

2

Wipe with nail cleanser or alcohol

Removes dust and oils

3

Apply a thin coat of peel-off gel

No base coat needed

4

Cure under LED | UV lamp – 60s

5

Apply a second thin coat

Applying thin coats is key to long lasting wear

6

Cure again – 60s

7

Salon-quality gel shine

How To Remove

1

Gently lift an edge

2

Soak nails in warm water

3

Gently peel off

4

No acetone | No damage

Write a Review

0
0 out of 5 stars (based on 0 reviews)
Excellent
Very good
Average
Poor
Terrible

There are no reviews yet. Be the first one to write one.

Product Guidance

For full step-by-step instructions, visit our How to Use page.

Minyglam is a single-step system — no base coat or top coat required.

For long-lasting, high-gloss wear:
Buff – Lightly but thoroughly mattify the entire nail surface. Ensure no area is missed.
Clean – Wipe thoroughly with Nail Cleaner to create a pristine base.
Lamp Required – Cure each layer for 60 seconds under an LED lamp.

For most users, proper preparation alone delivers salon-quality durability with easy peel-off removal.

If your nails are extremely smooth or naturally oily and wear time is shorter than expected, you may use Primer instead of Nail Cleaner.

Primer increases adhesion and extends wear.
Use only on healthy, undamaged nails — and only when necessary.

Because Primer enhances durability, removal may require slightly longer wear time before the polish lifts easily.

Step 1 — Warm Water + Oil
Soak in warm water.
Massage oil gently around the edges.
Peel slowly once lifting begins.

If It Does Not Release Easily
Lightly buff the surface.
Soak with Gel Polish Remover for at least 10 minutes.
Gently push and lift with a cuticle stick.
Do not force removal.

If your nails are thin, porous, or prone to bending:

Use our Soft Buffer to gently refine the surface without over-thinning the nail.

Before warm water removal, massage a drop of cuticle oil around the edges to help lift smoothly.

For additional reinforcement, apply one of our Vitamin Bases before color.
Ideal for those who prefer extra structure.

Keep away from heat and direct light.
Close the cap tightly after use to prevent curing inside the bottle.

Manufacture by : MI-NY Srl

Content : 11 ml / 0,37 FL.OZ.

POA : 24M

Ingredients : Acrylates Copolymer, Pentaerythritol tetra (3-mercaptopropionate),2-Isopropyl Thioxanthone, Dimethicone

How To Apply

1

Lightly Buff to Mattify

Creates grip for longer wear

2

Wipe with nail cleanser or alcohol

Removes dust and oils

3

Apply a thin coat of peel-off gel

No base coat needed

4

Cure under LED | UV lamp – 60s

5

Apply a second thin coat

Applying thin coats is key to long lasting wear

6

Cure again – 60s

7

Salon-quality gel shine

How To Remove

1

Gently lift an edge

2

Soak nails in warm water

3

Gently peel off

4

No acetone | No damage

Write a Review

0
0 out of 5 stars (based on 0 reviews)
Excellent
Very good
Average
Poor
Terrible

There are no reviews yet. Be the first one to write one.

Frequently Bought Together

Discover the most visited collections across our store—curated by real customers who share your taste.